Re-Covering Your Wingback Chair: Revitalise Your Space with Style

Wingback chairs are timeless pieces that add a touch of elegance and comfort to any space. However, over time, the fabric on these chairs may show signs of wear and tear, prompting the need for a refresh. Rather than investing in a brand-new chair, consider the rewarding and cost-effective option of re-covering a wingback chair. In this comprehensive guide, we will walk you through the step-by-step process, helping you transform your worn-out chair into a stylish focal point for your room.

Materials Needed

Before you begin, gather the necessary materials. Here’s a basic list to get you started:

• Wingback chair
• Fabric of your choice (ensure you have enough to cover the entire chair)
• Seam ripper
• Screwdriver
• Pliers
• Staple gun
• Staples
• Scissors
• Measuring tape
• Sewing machine (optional)

Step 1: Assess the Chair:

Start by thoroughly examining your wingback chair. Identify any areas where the fabric is damaged, and note the condition of the padding underneath. This assessment will guide your decisions throughout the re-covering process.

Step 2: Remove the Old Fabric:

Using a seam ripper, carefully remove the old fabric from the chair. Take your time to avoid damaging the underlying padding or frame. Use pliers to pull out any staples that may be holding the fabric in place.

Step 3: Inspect and Repair:

Once the old fabric is removed, assess the condition of the padding and the chair frame. Make any necessary repairs, such as reinforcing the frame or replacing damaged padding. This step is crucial for ensuring the longevity of your reupholstered chair.

Step 4: Measure and Cut the New Fabric:

Lay out your chosen fabric and measure it to fit the chair. Leave extra fabric on each side to allow for stapling. Double-check your measurements before cutting to avoid any mistakes. If your fabric has a pattern, be mindful of how it aligns with the chair.

Step 5: Upholster the Frame:

Start upholstering by attaching the fabric to the wings of the chair, securing it with a staple gun. Work your way around the chair, pulling the fabric taut as you staple. Take care to fold and tuck the fabric neatly around corners and edges for a professional finish.

Step 6: Addressing Corners and Curves:

Wingback chairs often have intricate curves and corners that require special attention. To tackle these areas, make small, strategic cuts in the fabric, allowing it to fold neatly around curves without bunching or puckering.

Step 7: Secure the Seat:

Continue stapling the fabric across the seat of the chair, ensuring it remains smooth and wrinkle-free. Pull the fabric tight and staple it securely to create a clean and polished look. Trim any excess fabric, leaving enough to fold neatly under the chair.

Step 8: Finishing Touches:

Once the fabric is securely in place, go over the entire chair, tightening any loose staples and ensuring a snug fit. Trim any excess fabric, leaving a clean edge. If you’re adept with a sewing machine, you can add a tailored touch by sewing a slipcover for a more polished appearance.

Conclusion:

Re-covering your wingback chair is a rewarding and budget-friendly DIY project that can breathe new life into a beloved piece of furniture. With the right materials, a bit of patience, and attention to detail, you can transform your worn-out chair into a stylish statement piece that enhances the beauty of your living space. Enjoy the satisfaction of not only saving money but also creating a personalized and revitalized piece of furniture that reflects your unique style and craftsmanship.

For more information on Re-Covering Your Wingback Chair contact Hill Upholstery.